“EtherCAT或CANopen电机控制器”参数说明
是否有现货: | 否 | 认证: | ISO |
功能: | 位置伺服 | 控制方式: | 闭环 |
驱动元件类型: | 机电 | 型号: | C5 |
规格: | 齐全 | 商标: | C5 |
包装: | 齐全 | 产量: | 2000 |
“EtherCAT或CANopen电机控制器”详细介绍
无刷、步进电机智能控制器 EtherCAT or CANopen智能闭环控制,超精准,静音控制
使用NanoIP基于浏览器的软件,通过以太网进行控制器的参数参数。NanoJ2.0是可用于创建独立的应用程序,诸如用于分散或多轴的应用程序。
技术参数
Operating voltage |
12-48 VDC (low-current version), or 12-48 V DC (high-current version) |
Continuous current |
10 A eff. (low-current version), or 18 A eff. (high-current version) |
Peak current |
10 A effective (low current version), or 54 A effective (high current version) |
Commutation |
Open-loop stepper motor, closed-loop stepper motor with encoder, BLDC with sinusoidal commutation via hall sensor, BLDC with sinusoidal commutation via encoder |
Operating mode |
Profile position mode, velocity mode, homing mode, cyclic syncposition mode, cyclic sync velocity mode, cyclic sync torque mode, clock/direction mode, application program (NanoJ) |
Parameter setting |
Browser-based via Ethernet with the NanoIP interface |
Field-bus interfaces |
EtherCAT or CANopen |
Encoder input |
5 V or 24 V signal, differential or single-ended, max. resolution 65536 CPR (16 bit), UVW connection for hall sensor |
Inputs |
4 inputs 5 V/24 V switchable in software (inputs 1 to 4); 2 inputs, wide range, 5-24 V (inputs 5 and 6); 2 analog inputs -10 to +10 V or 0-20 mA (switchable in software) |
Outputs |
2 transistor outputs, (open drain, 0 switching, max. 24 V/0.5 A) |
Brake |
1 open-drain output, max. 1.5 A |
|
. |